Radium
Radium Fuel Rails, Top Feed Upgrade, Subaru EJ, Top Port
Click here to download installation instructions (PDF)
Download discontinued 20-0467-02 fuel rail instructions (PDF)
PORTS AND FITTINGSThe fuel rail ports are tapped for 8AN ORB.
Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.
Reference the chart below to be sure the proper fuel rails are ordered.
Manufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish.
These fuel rails are designed specifically for OEM or equivalent fitment injectors. For injector height flexibility and thermal insulation, 2 sets of machined insulating spacers are included. All injectors must use 11mm diameter upper O-rings just like the OEM Subaru injectors. Reference instruction manual for more information.
The fuel rails are compatible with all fuel types including popular alcohol mixtures such as E85.
20-0577-02 FUEL RAILS, TOP FEED UPGRADE, SUBARU EJ, TOP PORT
VEHICLE COMPATIBILITY
01-06 Subaru Impreza WRX (JDM/EDM)
01-06 Subaru Impreza WRX STi (EDM)
01-02 Subaru Impreza WRX STi (JDM)
The vehicles below also require 20-0372
03-06 Subaru Impreza WRX STi (JDM)
04-11 Subaru Impreza (EJ253)
05-10 Subaru Forester (EJ253)
05-12 Subaru Legacy (EJ253)
06-09 Subaru Outback (EJ253)
FUEL INJECTOR COMPATIBILITY
This fuel rail is compatible with factory or OEM equivalent fuel injectors. If upgrading fuel injectors, consult your aftermarket injector supplier for details. Radium Engineering cannot specify any further injector dimensions other than stating ‘OEM equivalent’.
OVERVIEW
These fuel rails have the same mounting, injector spacing and fitment as the 20-0567-02 (above). However, each fuel rail has an 8AN ORB "top port", unlike 20-0567-02 which has a center lower port (picture below shown with Fuel Rail Adapter 20-0372).
The added clearance is necessary for the EJ207 and JDM EJ205 engines that have early AVCS solenoids with vertical connectors (shown below).
INCLUDED
-Black Anodized Laser Etched Aluminum Fuel Rails (x2)
-Thermal Insulating Press-In Spacers, 20mm (x4)
-Stainless Steel M8x1.25 Mounting Bolts (x4)
