Link G5 Voodoo Neo 4 ECU

G5 Voodoo Neo 4 

The next generation of engine management for many more engines. 

The G5 Voodoo Neo 4 can run:

6 cylinders port or direct injection and direct spark, or, 

4 cylinders with direct/port staged injection, and direct spark  

The G5 Voodoo processing units are the perfect choice for professional level motorsport.

The G5 Voodoo Neo 4 works on a variety of vehicles, please contact a LinkECU Reseller or Technical Support for advice regarding your specific project.

In the box:

G5 Voodoo Neo 4 ECU
USB-C Connection Cable
WiFi Antenna
4m GPS Antenna (Magnetic or Adhesive Mount)
USB-C and SMA Dust Covers
QuickStart Guide (A5)
Installer I/O table (A3)
Link stickers

New comms module: Up to 10x faster log file download speeds, from minutes to seconds, and enhanced WiFi and GPS
Built in ethernet 
1GB onboard logging in data storage unit
1 onboard wideband 
CNC case, sealed enclosure
68 pins total (Link A and B 34 pin superseal connectors)
K-line support 
New WEIPU CAN connector, which supplies power for the CAN-bus. 
Highly customisable IO, using 2 types of multi purpose pins:
ADIO pins and Aux./Digital-Input pins. These pins can act as inputs or outputs.
Can now power up via the USB cable, making firmware updates and setting up the initial tune a breeze at your PC.
Runs on the same highly acclaimed PC Link software as G4X, meaning you don’t need to learn a new software package. You can open both G4X and G5 log and map files in the same software (G4X Map can also be loaded into a G5 Voodoo Pro)
More mounting options than ever, with through holes and threaded mount holes on the side and underneath.
All NEOs are direct injection capable, including staged port-DI on NEO 4 and 6. 

Requires “A” & “B”  connector kits (not supplied).

Inputs/Outputs
Control up to 6 cylinders with port or direct injection and direct spark, or 4 cylinders with direct/port staged injection, thanks to:8 injector pins
6 ignition pins
12 aux. output pins 
(4 Aux pins are shared with 4 DI Pins. You can only use each pin for either Injection or DI, not both at the same time.)
6 ADIO pins
Highly customisable IO, using 2 types of multi purpose pins: ADIO pins,  and Aux./Digital-Input pins. These pins can act as inputs or outputs.
ADIO are a unique pin type. ADIO can act as an Aux Output (switched or PWM), as an Analogue Input, or as a Digital Input, but cannot read PWM/frequency.
Neo 4 has Aux/DI pins which are used as either an Aux pin, or a Digital Input pin. They can read PWM/frequency.
Any unused injector/ignition pins can be used as an auxiliary pin
All ignition and auxiliary pins are back feed protected.
3 analog inputs
10 digital inputs
4 temperature inputs
2 knock inputs
2 trigger inputs
1 x wideband lambda controller
Dual H-Bridge e-throttle control 
Dedicated ignition switch pin
5v sensor supply
CAN 1 via Weipuconnector. CAN connector now supplies power and ground. 
 

Communications
USB-C (cable included)
Power over USB
WiFi: Connect directly to the ECU via built-in Wifi Access Point, or add it to an existing network (antenna included)
CAN: New WEIPU connector supplies power for CAN devices
Ethernet: Built in ethernet which can function like USB. Also adds the ability to connect to the ECU over a network. 
GPS: Functional when GPS antenna connected (antenna included)
 

Data Logging 
1gb logging capacity
Logging over WiFi 
100kHz max. total logging rate 
250 logging channels
 
Size & Weight
Length: 107mm (4.21 inches)
Width: 158mm (6.22 inches)
Max side height: 45mm (1.77 inches)
Weight: 730grams (25.75 ounces)  
 

Mounting
4x M5 threaded mount holes on the sides for bracket mounting 
4x M5 threaded mount holes on the underside for clean mounting 
4 x 5.5mm unthreaded through holes for mounting through (designed for use with M5 bolts)
 

Connectors 
A Header
Link Pin Kit A 
TE Superseal 1.0
B Header
Link Pin Kit B
TE Superseal 1.0
Wi-Fi
Wi-Fi Antenna 
RP-SMA (reverse polarity) 
GPS
SMA
USB
USB Type-C
Ethernet
WEiPU SF810B/P8
CAN1
WEiPU SF610B/P4